Lulzbot Taz3: Difference between revisions

@@ Line 33: / Line 33: @@
 *Additionally, Lulzbot provides a [http://devel.lulzbot.com/TAZ/2.1/software/2013Q4/slic3r/config/pt35mm-nozzle/medium_ABS_no-support_pt35nzl_pt2-layer-height_config.ini slic3r config file] for the Taz3
-=== Suggested Settings ===
+== Suggested Settings ==
-==== Printer settings ====
-[[File:Taz3_printer_settings.ini]]
-This file is for the 'printer settings' tab of Slic3r. It defines bed size, machine type and specifications, retraction and number of extruders. It also includes start/end gcode. This file will automatically disable both heaters when an object finishes printing.
-==== Filament Settings ====
-[[File:Taz3_filament_settings.ini]]
-This file is for the 'filament settings' tab of Slic3r. It defines things like filament diameter and extruder/bed temperatures. This is also where the 'fast layer' settings are, which allow you to adjust the print speed for small layers.
 ==== Print Settings Without Support - Fast ====
 [[File: Taz3_print_settings_NO_SUPPORT.ini]]