Central Machinery Metal Bandsaw: Difference between revisions
From Pumping Station One
| Line 21: | Line 21: | ||
== Note == | == Note == | ||
Do not drop the bandsaw to the | * Always adjust the upper guide to expose the thickness of your cut. | ||
* Do not drop the bandsaw to the workpiece, always place it down on the work gently after you've chosen an appropriate weight for the material you're cutting. | |||
* '''Never force the blade before or after you've begun your cut.''' | |||
* Always properly secure your work for best results - there are good strategies for properly securing angle and irregular shapes. | |||
== Documentation == | == Documentation == | ||
Revision as of 12:36, 12 January 2014
 | |
| Owner/Loaner | PS:One |
|---|---|
| Serial Number | ? |
| Make/Model | Model 93762 |
| Arrival Date | ? |
| Usability | yes |
| Contact | Metal Mike |
| Where | Cold Metals |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | $250 |
| Host Area | {{{hostarea}}} |
Use
For cutting metal stock down to useful sizes and shapes.
Note
- Always adjust the upper guide to expose the thickness of your cut.
- Do not drop the bandsaw to the workpiece, always place it down on the work gently after you've chosen an appropriate weight for the material you're cutting.
- Never force the blade before or after you've begun your cut.
- Always properly secure your work for best results - there are good strategies for properly securing angle and irregular shapes.
Documentation
Certified Users
| qualified member | trained by |
|---|---|
| Everett | Derek |
| Greg Teiber | |
| Jason | Everett |
