Shopbot PRS CNC router: Difference between revisions
From Pumping Station One
Makelemonade (talk | contribs) Rearranged sections according to their usefulness. Added section on gouging spoilboard. Added running spindle warmup routine to the checklist. |
Makelemonade (talk | contribs) No edit summary |
||
| Line 142: | Line 142: | ||
*Autodesk Fusion 360 | *Autodesk Fusion 360 | ||
**The ShopBot computer does not have this and may not be fast enough to run it. | **The ShopBot computer does not have this and may not be fast enough to run it. | ||
**You '''MUST''' use the custom post-processor | **You '''MUST''' use the custom post-processor. Otherwise, you will bypass the safety check to make sure the spindle really is running! Download [[Media:ShopBot PSOne Fusion 360 Post Processor.zip|Post Processor for Autodesk Fusion 360]] (which includes the change to check that the spindle actually started. | ||
***For '''Cloud''' (Probably best since it should work on any computer you use Fusion 360 with) | ***For '''Cloud''' (Probably best since it should work on any computer you use Fusion 360 with) | ||
**** Open Fusion 360 and choose preferences under the "head" icon in the top left. Choose CAM, then "Enable Cloud Libraries" | **** Open Fusion 360 and choose preferences under the "head" icon in the top left. Choose CAM, then "Enable Cloud Libraries" | ||
