DiArco sheet metal notcher: Difference between revisions
From Pumping Station One
Created page with "{{Template:EquipmentPage |owner=PS:One |model=16Ga corner notcher |serial=1-2528 |arrived=Fall, 2015 |doesitwork=yes |contact=Dean Anderson |where=Cold Metals, on a bench |cer..." |
No edit summary |
||
| Line 5: | Line 5: | ||
|arrived=Fall, 2015 | |arrived=Fall, 2015 | ||
|doesitwork=yes | |doesitwork=yes | ||
|contact= | |contact=Host Cold Metals | ||
|where=Cold Metals, on a bench | |where=Cold Metals, on a bench | ||
|certification=No | |certification=No | ||
Latest revision as of 13:34, 28 August 2018
| File:DiarcoNotcher.jpg | |
| Owner/Loaner | PS:One |
|---|---|
| Serial Number | 1-2528 |
| Make/Model | 16Ga corner notcher |
| Arrival Date | Fall, 2015 |
| Usability | yes |
| Contact | Host Cold Metals |
| Where | Cold Metals, on a bench |
| Authorization Needed | No |
| Hackable | no |
| Estimated Value | $500 |
| Host Area | Cold Metals |
Notes
- blades may need sharpening/alignment
Safety
- Don't get your fingers under the shear- It WILL take the tips of your fingers off if you bring the blade down on them
