@@ Line 1: / Line 1: @@
 {{Template:EquipmentPage
 |image =
-|owner = David Rubman
+|owner = PS1
 |serial = NAN
 |certification = yes
 |hackable = no
-|model = Jet 1236
+|model = Jet 1442 headstock, and 1642 bed (probably)
 |arrived = 11/21/2015
 |doesitwork = no
-|contact = David Rubman
+|contact = Wood Shop Area Host
-|where = Woodshop
+|where = removed from Wood Shop
 |value = 800
 |itemphoto =
+|hostarea = removed from Wood Shop
 }}
-'''This tool requires certification for use.'''
+== Description ==
+This is an oddball lathe that seems to be assembled from a collection of parts from other lathes.
+*The bed and legs are from a No:1642 16" electronic variable speed lathe.
+**There was a dataplate on the legs to this effect, but ALL the information on it was wrong (swing, working length, speed control type, etc.) for our lathe configuration, so it was removed
+*The headstock and tailstock are (we think) from a 1442 MECHANICAL variable speed lathe
+** manual here: [[file:Jet_1442_lathe.pdf]]
+*The tool rest is fairly large for the headstock height and ~probably~ originated with the 16" lathe parts
 == Status ==
-The Jet Wood Lathe hasn't been put in service yet, so it is listed as "not working."
+It spins, it works, and serviceable tailstock and headstock parts are on hand. Don't change the speed - the speed-change mechanism is broken and also jammed in place.
+Aug28 2019.  Belt keeps coming off —- motor pulley bushing issue?
+Diagnosis email from Donzell G.
+The Jet wood lathe is down for the count and is not safe to use. Eric and I were hoping it would last until next years budget.  The Robust Sweet 16 wood lathe can meet the needs of PS1 members and it comes with the seven-year top to bottom everything included warranty. Other lathes that I have found that could work only had a one-year limited warranty. Here's a video link of the Robust Sweet 16 lathe https://www.youtube.com/watch?time_continue=3&v=sX_iqj1V1Ek
+== How To Get Authorized ==
+Authorization for this tool by authorized proctors only: Authorized Proctors
+We try to say "authorized" now at PS:1 instead of "certified" because we aren't saying you're an expert after authorization, just briefed ... There is a list of authorized proctors (trainers) right here. You can't become authorized from just any other member who knows how to use this tool, it's a dangerous piece of equipment and we're keeping the authorization process a little more formal because of that. Ask the area host for the wood shop, any volunteer authorizers for wood shop, or the people listed as authorized proctors about authorization.
+'''This tool requires certification for use. Please contact one of the following to arrange authorization.'''
+* This list is a basic starting point pending approval of the area host.
+{| class="wikitable" border="1"
+! Approved Authorizer
+! Contact
+|-
+|Matt Triano
+|matt.triano @ gmail.com (retired, beloved ex-member)
+|-
+|Eric Beauchamp — area host
+|eric @ home-chicago.com
+|-
+|Sevin Strauss — approved authorizer
+|
+|-
+|Andrew Camardella — approved authorizer
+|
+|-
+|Donzell — approved authorizer, PRIMARY AUTHORIZER AND LATHE CONTACT PERSON
+|donzellphoto at gmail dot com.
+|-
+|}
+== Resources ==
+[https://wiki.pumpingstationone.org/Wood_Lathe_Authorization_Checklist Wood Lathe Authorization Checklist]
+[https://wiki.pumpingstationone.org/File:Introwt.pdf Intro to Woodturning by Brian Clifford]
+[https://www.reddit.com/r/turning/wiki/index Woodturning Reddit Wiki]
 == Personal Protective Equipment ==
@@ Line 48: / Line 101: @@
 * Return all chisels and other tools to racks.
 * Leave the machine in a safe, clean and tidy state.
+* Sweep or vacuum any wood debris/dust/shavings.
 == Potential Hazards and Injuries ==
-* Eye injuries from flying debris or defective timber.
+* Please watch this short safety video on YouTube [https://www.youtube.com/watch?v=7yhkeUP6Mf8]
-* Hair/clothing getting caught in moving machine parts.
+* Eye injuries from flying debris or defective timber. Wear appropriate eye protection.
-* Airborne dust.
+* Hair/clothing getting caught in moving machine parts. Remove jewelry, loose clothes, keep sleeves short, roll up sleeves, no gloves, secure long hair
+* Airborne dust. Wear a respirator or dust mask appropriate for the material you are using.
+* Smacked or cut/impaled by a gouge. If you don't maintain a good stance and a good grip, a tool can go flying.
+* Wood shrapnel. Occasionally, the workpiece can explode. A face shield, an apron, and working slowly with sharp tools can help avoid this hazard.
 == Do ==
@@ Line 61: / Line 118: @@
 == Don't ==
 * Drive the workpiece into the drive center while the drive center is in the headstock.
-** Set the drive center into the workpiece with a soft mallet prior to installing it on the headstock.
 * Touch your project by hand while the lathe is running
-== How To Get Certified ==
+== DO ==
-The area host has determined that certifications for this machine should not be viral.
+* Set the drive center into the workpiece with a soft mallet prior to installing it on the headstock.
+== Documentation ==
+https://wiki.pumpingstationone.org/Wood_Lathe_Authorization_Checklist
+Manual https://wiki.pumpingstationone.org/File:Jet_1236.pdf
-A list of members allowed to certify others will be posted here when the Danger Committee has finish creating a process.
+[[File:Oneway Chuck Manual.pdf]]
-== List of Currently Certified Users ==
+Short, basic safety video: https://www.youtube.com/watch?v=GV0dmf2mBMc
+== List of Authorized Users ==
 {| class="wikitable" border="1"
-! Qualified Member
+! Authorized User
 ! Trained By
+! Auth Date
+|-
+|Matt Triano
+|Patrick Grider
+|-
+|Sevin Straus
+|Danger Committee
+|-
+|Eric Beauchamp
+|Danger Committee
+|-
+|Erik Wessing
+|Danger Committee
+|-
+|Andrew Camardella
+|Danger Committee
+|-
+|Ray Doeksen
+|Danger Committee, Sevin Strauss
+|-
+|Michael Skilton
+|Danger Committee
+|-
+|Daron Wooding
+|Andrew Camardella
+|-
+|Sam Paris
+|Andrew Camardella
+|2016-07-20
+|-
+|Donald Wells
+|Andrew Camardella
+|2016-07-20
+|-
+|[[user:mct|McTavish McArdle]]
+|Andrew Camardella
+|2016-07-20
+|-
+|[[user:goatking|An Phan]]
+|Andrew Camardella
+|2016-08-18
+|-
+|[[user:mkeith|Matt Keith]]
+|Andrew Camardella
+|2016-08-18
+|-
+|Ian Monroe
+|Andrew Camardella
+|2016-07-20
+|-
+|Les Schier
+|Sevin Straus
+|2016-09-01
+|-
+|Jon Komperda
+|Andy Larkin
+|2016-10-27
 |-
-|
+|Clarence Bartenhagen
-|
+|Sevin Straus
+|2017-02-01
+|-
+|Joe Dowling
+|Sevin Straus
+|2017-02-01
+|-
+|Crystal Morales
+|Sevin Straus
+|2017-03-11
+|-
+|Jason Pittman
+|Sevin Straus
+|2017-03-11
+|-
+|Sam Chen
+|Sevin Straus
+|-
+|Andrew Wingate
+|Donzell
+|2017-10-22
+|-
+|Tucker Tomlinson
+|Donzell
+|2017-10-22
+|-
+|Theo
+|Donzell
+|2017-12-10
+|-
+|Jeff Gershune
+|Donzell
+|2018-1-14
+|-
+|Arjun Sharma
+|Donzell
+|2018-1-14
+|-
+|Jack Phillips
+|Donzell
+|2018-1-14
+|-
+|Ryan Himmelblau
+|Donzell
+|2018-1-14
+|-
+|Scott Greenburg
+|Donzell
+|2018-1-14
+|-
+|Zack Sasnow
+|Donzell
+|2018-1-28
+|-
+|Corey Toyama
+|Donzell
+|2018-1-28
+|-
+|Nick Prorok
+|Donzell
+|2018-3-11
+|-
+|Eugene Liokumovich
+|Donzell
+|2018-8-26
+|-
+|Michael Donovan
+|Donzell
+|2018-10-28
+|-
+|Kathryn Connolly
+|Donzell
+|2018-11-11
+|-
+|Sam Lewis
+|Donzell
+|2018-11-11
+|-
+|Aaron Hale
+|Donzell
+|2019-1-13
+|-
+|Derwin Umali
+|Donzell
+|2019-1-27
+|-
+|Brandon Bay
+|Donzell
+|2019-1-27
 |-
-|
+|Jacob Jandacek
-|
+|Donzell
+|2019-1-27
 |-
-|
+|Greg Bell
-|
+|Donzell
+|03/23/19
 |-
-|
+|Maciej Warchalowski
-|
+|Donzell
+|2019-4-14
 |-
-|
+|Ryan Pierce
-|
+|Donzell
+|2019-08-11
 |-
-|
+|Elizabeth Koprucki
-|
+|Donzell
+|2019-08-11
 |-
-|}
-== Documentation ==
-The following is a work in progress.
-https://wiki.pumpingstationone.org/Wood_Lathe_Authorization_Checklist
-[[Category:Woodworking]]
+[[Category:removed from WoodShop]]
+[[Category:Loaned Equipment]]
 [[Category:Shop Equipment]]

Jet Wood Lathe: Difference between revisions