Boice Crane Drill Press: Difference between revisions
From Pumping Station One
No edit summary |
No edit summary |
||
| (22 intermediate revisions by 13 users not shown) | |||
| Line 1: | Line 1: | ||
{{Template:EquipmentPage | {{Template:EquipmentPage | ||
|image = boice_crane.jpg | |image = boice_crane.jpg | ||
|owner=PS:One | |owner=PS:One | ||
|model=Boice Crane | |model=Boice Crane 24103 24" Power Feed | ||
|arrived=January 2015 | |arrived=January 2015 | ||
|serial=23649 | |serial=23649 | ||
|doesitwork=yes | |doesitwork=yes | ||
|contact=Dean Anderson | |contact=Dean Anderson | ||
|where= | |where=Cold Metals | ||
|certification=yes | |certification=yes | ||
|hackable=no | |hackable=no | ||
|value=$600}} | |value=$600}} | ||
=Removal Section= | |||
*What is it? - Boice Crane Drill Press | |||
*Who is sponsoring? - Cold Metals Host - Jim Brink | |||
*Date published to the mailing list and RT- 06/11/2018 | |||
*Asset value - $100 | |||
*Suggested method of removal - Public sale- Craigslist | |||
*Background notes - | |||
*Resolution of removal - | |||
*Approval - | |||
== Specifications == | |||
8 speed | |||
Gear-head. No belts or Jacobs chuck to slip, which means there is a lot of torque. | |||
Morse #3 taper spindle | |||
Capacity, cast iron 1 1/4" | |||
Drills to center 23" | |||
approximate weight 600 pounds | |||
motor HP 1.5 (high) 1.2 (low) | |||
Spindle speeds (8) 84, ... | |||
== Auth/Use Notes == | |||
These notes are for reference after authorization by a person. | |||
Only use drills and accessories with correct shank taper and tang | |||
Work piece needs secure mounting due to spindle's high torque | |||
No through hole (table designed for coolant), must use vise | |||
No quill stop, must set table or head height to prevent drilling into table | |||
Don't force gear selectors, hand turn spindle as needed to align gears | |||
Gears reverse spindle, must turn power switch to appropriate side for correct spindle rotation direction | |||
Power switch has two speeds to each side | |||
Drill shanks must be firmly seated in taper | |||
To remove drill, lower spindle to expose the slot in the quill, turn the spindle by hand until the quill slot lines up with the spindle slot, insert the #3 drift into the slot with the curved edge facing up, grasp drill, tap drift with hammer | |||
== To-Do == | |||
Clean drill shanks | |||
Mill pocketed vise jaw flat | |||
More clamps matching table T-slots | |||
Improve sketchy quill return mechanism | |||
Adjustable quill stop | |||
Coolant system | |||
== Maintenance == | |||
[[Boice_Crane_Drill_Press_maintenance|Boice_Crane_Drill_Press_maintenance]] | |||
== Equipment == | |||
== References == | |||
== List of Currently Authorized Users == | |||
{| class="wikitable" border="1" | |||
! Qualified Member | |||
! Trained By | |||
!Date Trained | |||
|- | |||
|Dean Anderson | |||
|Machine Shop Host Cred | |||
| | |||
|- | |||
|Everett Wilson | |||
|Dean Anderson | |||
|- | |||
|Tom Judd | |||
|Dean Anderson | |||
| | |||
|- | |||
| Todd Allen | |||
| Dean Anderson | |||
|9/15/2015 | |||
| | |||
|- | |||
|Greg Kudlacz | |||
|Todd Allen | |||
|- | |||
|Dafe Hughes | |||
|Todd Allen | |||
|- | |||
|Connor Sullivan | |||
|Tom Judge | |||
|1/22/16 | |||
|- | |||
|Abel Greenwald | |||
|Michael Patton | |||
|- | |||
|Bruce Mace | |||
|Chris Ruhland | |||
|3/7/17 | |||
|- | |||
|Sam Chen | |||
|Chris Ruhland | |||
|3/7/17 | |||
|- | |||
|Michael Ice | |||
|Sam Olendorf | |||
|2/08/18 | |||
|Aaron Hale | |||
|Sam Olendorf | |||
|8/8/2018 | |||
|-} | |||
[[Category:Cold Metals]] | |||
