Recurring Maintenance: Difference between revisions
From Pumping Station One
Created page with "==General Area== *Put equipment labels on equipment that is missing an equipment label (make a new wiki page if necessary). *Move items in the Wut Zone to Limbo *Throw out / R..." |
Rtystgeeke (talk | contribs) |
||
| (8 intermediate revisions by 4 users not shown) | |||
| Line 3: | Line 3: | ||
*Move items in the Wut Zone to Limbo | *Move items in the Wut Zone to Limbo | ||
*Throw out / Recycle Limbo items. | *Throw out / Recycle Limbo items. | ||
* | *Vacuum the top of the dust collections pipes | ||
*Empty the dust collector bins and clean the filter stack by connecting a vacuum to the cleanout port. | *Empty the dust collector bins and clean the filter stack by connecting a vacuum to the cleanout port. | ||
*Audit member shelves. | *Audit member shelves. | ||
*Change filter in upstairs HVAC (every 30 days): [[HVAC#Filter]]. | *Change filter in upstairs HVAC (every 30 days): [[HVAC#Filter]]. | ||
*Oil the pumps in the boiler room (annually): [[HVAC#Pumps]]. | *Oil the pumps in the boiler room (annually): [[HVAC#Pumps]]. | ||
*Clean out vents for the heaters | |||
*Change air conditioning filters | |||
==CNC Area== | ==CNC Area== | ||
| Line 18: | Line 20: | ||
==Electronics Area== | ==Electronics Area== | ||
*Remove/recycle e-waste | |||
==Crafts Area== | ==Crafts Area== | ||
==Hot Metals Area== | ==Hot Metals Area== | ||
* Clean table with chop saw, sander, etc. | |||
* Sweep floor, especially by floor-standing grinder and welders | |||
* Clean outside of cabinets | |||
* Replace water in barrel | |||
* Ensure there are shop (blue) paper towels by the sink | |||
* Wash cotton welding jackets | |||
==Cold Metals Area== | ==Cold Metals Area== | ||
*Lubricate the manual Bridgeport milling machine head. | *Lubricate the manual Bridgeport milling machine head. | ||
* | *Doall bandsaw- oil Reeves drive shaft (SAE 10 in oil cup under the big metal cover). | ||
*Grease Johnson bandsaw (2 zerks on pivot shaft). | *Grease Johnson bandsaw (2 zerks on pivot shaft). | ||
==Wood Shop Area== | ==Wood Shop Area== | ||
*Sweep | |||
==Tool Cage Area== | ==Tool Cage Area== | ||
*Put away tools | |||
==Kitchen Area== | ==Kitchen Area== | ||
*Clean refrigerator | |||
Latest revision as of 11:26, 17 February 2017
General Area
- Put equipment labels on equipment that is missing an equipment label (make a new wiki page if necessary).
- Move items in the Wut Zone to Limbo
- Throw out / Recycle Limbo items.
- Vacuum the top of the dust collections pipes
- Empty the dust collector bins and clean the filter stack by connecting a vacuum to the cleanout port.
- Audit member shelves.
- Change filter in upstairs HVAC (every 30 days): HVAC#Filter.
- Oil the pumps in the boiler room (annually): HVAC#Pumps.
- Clean out vents for the heaters
- Change air conditioning filters
CNC Area
- Grease Shopbot rails
- Clean underneath and around Shopbot
- Remove ticketed materials from
- under the Shopbot
- under the Shapeoko
- Organize vinyl
Electronics Area
- Remove/recycle e-waste
Crafts Area
Hot Metals Area
- Clean table with chop saw, sander, etc.
- Sweep floor, especially by floor-standing grinder and welders
- Clean outside of cabinets
- Replace water in barrel
- Ensure there are shop (blue) paper towels by the sink
- Wash cotton welding jackets
Cold Metals Area
- Lubricate the manual Bridgeport milling machine head.
- Doall bandsaw- oil Reeves drive shaft (SAE 10 in oil cup under the big metal cover).
- Grease Johnson bandsaw (2 zerks on pivot shaft).
Wood Shop Area
- Sweep
Tool Cage Area
- Put away tools
Kitchen Area
- Clean refrigerator
