Formlabs Form 3 SLA Printer: Difference between revisions

Browse history interactively

← Older edit

VisualWikitext

@@ Line 9: / Line 9: @@
 |where = 3D Printer Lab
 |doesitwork = yes
-|contact = SLA@pumpingstationone.org
+|contact = Specialty3d@pumpingstationone.org
 |value = $4,000
 |image = Form3.png
@@ Line 21: / Line 21: @@
 The 4th and 5th iteration of Formlab's SLA printers. Released for use by artists, designers, and professional 3D printers. The Form 3 offers a larger print area than the Form 2 and an improved optics engine.
-== Status ==
+== Paid Parts Program ==
+Members may have a part run at the cost of the resin without needing to be authorized.
-==Prerequisites to Authorization==
+You can send an STL file for automatic supports to Shauen via discord or email - automatic settings are used to produce your part. Someone will be in contact with you to confirm material and collect payment.
-The only prerequisite for Form 3 authorization is to be authorized on the "regular" 3D printers. Must be able to create a print on one of the currently operational filament printers. Formlabs authorization is about one 3-hour session.
+You can also prepare files yourself using the Formlabs Preform software. There is a Discourse thread discussing how to do so in great detail: https://discourse.pumpingstationone.org/t/how-to-succeed-using-preform-for-the-form-3-sla-3d-printer/1210
-== Authorization ==
+==Authorization==
+Authorization is currently restricted, though authorization is not required to print through the [[Paid Parts|paid parts program]].
-'''Using Canvas for Tracking Authorizations'''
-Authorizations will be tracked in Canvas. This will be set up shortly.
 ==Scheduling==
@@ Line 48: / Line 46: @@
 | Paul Ocampo
 |-
-|
 |}
 ==Additional Resources & Support==
-The email address SLA@pumpingstationone.org is not yet set up. Email sent there will bounce. Contact kathryn.born@pumpingstationone.org in meantime.
+Contact Specialty3d@pumpingstationone.org with questions, or send a message in #sla-printing on Slack or post a question in the Form 3 SLA category under CNC in Discourse.
+You can also check some fantastic documentation Formlabs have set up on their website here: https://support.formlabs.com/s/topic/0TO1Y000000cVQoWAM/best-practices-for-printability-form-3l?language=en_US
+==Authorized People==
+'''Danger Committee'''
+{| class="wikitable"
+| Sky Nova
+|-
+| Kathryn Born
+|-
+| Paul Ocampo
+|-
+| Andrew Camardella
+|-
+| [[user:Newfatmike|Mike Thompson]]
+|-
+| Ray Doeksen
+|-
+| Aushra A
+|-
+| Brian Barnt
+|-
+| Ryan Pierce
+|-
+| Victor Mateevitsi
+|-
+| Brian Adamson
+|}
-==Useful Links==
+[[Category:CNC]]
+[[Category:StereoLithography]]
+[[Category:Fabrication]]