Cubify Sense 3d Scanner: Difference between revisions

Browse history interactively

VisualWikitext

@@ Line 6: / Line 6: @@
 |model = Sense
 |arrived = 2014
-|image = Cube Pro.jpeg
+|image = Sense 3d Scanner.jpeg
 |doesitwork = yes
-|contact = Will Garza, Ray Dokosen
+|contact = [[CNC|CNC Area Host]], or Will Garza, or Ray Doeksen
-|where = On top of Cubepro 3d Printer
+|where = On top of CubePro Trio 3D printer
 |value = $400
+|hostarea = CNC
+}}
-== Getting Started ==
+The 3Dsystems account is registered to the info@ email and the password can be found in the ticketing system.
-#Download the sense software to your laptop (PC/Mac): http://cubify.com/en/Products/SenseActivate
-#Install the software
-#when prompted input ?7027? as registration code
-#Follow on screen instructions to begin scanning
+== Getting Started with Sense Software ==
+# Download the sense software to your laptop (PC/Mac) - link below
+# Install the software
+# When prompted input registration code (taped to the side of the scanner)
+# Plug in the scanner into a USB port
+# Let Windows install the drivers - when complete Device Manager should show a USB Device > PrimeSense > PrimeSense Carmine 1.09
+# Follow on screen instructions to begin scanning
-the sense software is installed on the computer to the right of the cube pro as well, but is impractical to use from an immobile desktop tower
+==Software==
+===Sense 3D Scanner (native)===
+* https://www.3dsystems.com/shop/support/sense/downloads
+* SenseSetup_v2.2
+* Seems to work well, simple interface
+===ReconstructMe===
+* http://reconstructme.net/
+* ReconstructMe_64bit_2.5.1034
+* Go into settings and select the Carmine Scanner
+* Somewhat slow
+===Skanect===
+* https://skanect.occipital.com/download/
+* Skanect-1.9.1-win64.exe
+* Recording wasn't starting without a little bit of start delay
+* Fast with lots of options
-== Documentation ==
-[http://cubify.com/en/Products/SenseActivate Sense 3D Scanner activation page]
+[[File:Sense 3d Scanner location.jpeg|left|thumb|Sense 3d Scanner Location]]
+==Troubleshooting==
+* The scanner doesn't light up or tell you that it's on - except for a small internal red LED.
+* The right and left side snap on and can pop off if you need to get inside.
+* The cable feels loose but strain relief is internal to the device.
+== Documentation ==
+[http://cubify.com/en/Products/SenseActivate Sense 3D Scanner activation page]
+[[File:Sense userguide mac.pdf|Sense userguide mac.pdf]]
-== Maintenance ==
+[[File:Sense userguide pc.pdf]]
 [[Category:CNC]]