Area Improvements and Projects: Difference between revisions

Browse history interactively

← Older edit

VisualWikitext

Latest revision as of 08:57, 8 October 2017

General Area

Paint the back stairwell railings, main doorways.
Upgrade cable runs throughout the space to open cable raceways.
Clean up/reorganize the safe.

CNC Area

Crimp cables and metal tags/labels to all calipers
Clean and lubricate the Shopbot guide rails
Clean and lubricate CNC Plasma cutter rails
Stiffen CNC plasma cutter
Add z probe to CNC plasma cutter

Electronics Area

Clean whiteboard paint wall
Hang large sheets of showerboard to the CNC wall

Arts Area

Hot Metals Area

Exhaust gas ventilation to outside for plasma cutter and welders.
Sweep!

Cold Metals Area

Wood Shop Area

Add dust collection inlets for unconnected machines
Build manifold to small duct collector for sanding station
Build Chopsaw table.
Add floor sweep inlet for the dust collector.

Kitchen Area

Seal gap between catwalk and wall.
Mop the floor

@@ Line 1: / Line 1: @@
 ==General Area==
 *Paint the back stairwell railings, main doorways.
-*Fix the Tardis
-*Fix the ventilation fan in the shop that doesn't spin up.
-*Paulk workbench as a uniform replacement for tables around PS1. https://www.youtube.com/watch?v=KnNi6Tpp-ac Some features of this bench are not applicable, such as the tablesaw mount and perhaps the router table option.  Creating a CAD version of the design would speed up the construction.
-*Replace the orange table in the middle of the shop (it's becoming unstable)
-*Tidy Space stuff under the orange table
-*Replace dust collector impeller shroud clips as they all have hairline fractures
 *Upgrade cable runs throughout the space to open cable raceways.
-*Load cell sensor to monitor dust collector bin with alerts and automatic shutoff when its full
 *Clean up/reorganize the safe.
 ==CNC Area==
-*Move dust collection elbow so that it doesn't pass over the light in the shop, and the tube doesn't stretch to reach the home corner
-*Put up Lexan sheet on the right side opening of the new desk.
-*Build a spool rack that holds all filament spools above the 3D printers.
-*Plane and glue 2 sheets of MDF to the Shopbot wasteboard .
 *Crimp cables and metal tags/labels to all calipers
+*Clean and lubricate the Shopbot guide rails
+*Clean and lubricate CNC Plasma cutter rails
+*Stiffen CNC plasma cutter
+*Add z probe to CNC plasma cutter
 ==Electronics Area==
+*Clean whiteboard paint wall
+*Hang large sheets of showerboard to the CNC wall
-==Crafts Area==
+==Arts Area==
 ==Hot Metals Area==
-*Flip middle limbo wall to create storage for Hot Metals.
+*Exhaust gas ventilation to outside for plasma cutter and welders.
-*Exhaust gas ventilation to outside.
+*Sweep!
-*Acquire and install wall mounted compressed air hose real near and for use with the plasma cutter.
 ==Cold Metals Area==
-*Emerson/Sears mini band saw
-**Replace motor and pulley
-**Fix switch
-**Setup for cutting thing metal / tube stock etc
 ==Wood Shop Area==
-*Add dust collection drop for new planer.  May need to order elbows, 6" blast gate, 6" flanges.
+*Add dust collection inlets for unconnected machines
-*Add floor sweep inlet for the dust collector
+*Build manifold to small duct collector for sanding station
+*Build Chopsaw table.
-==Tool Cage Area==
+*Add floor sweep inlet for the dust collector.
 ==Kitchen Area==
-*Add sliding door to kitchen (check fire codes)
 *Seal gap between catwalk and wall.
+*Mop the floor